This angled hood is pleasing to the eye and it makes the hob area more accessible. Sleek, easy-clean glass surface in black and dimmable LED lighting. Matches seamlessly with other FINSMAKARE appliances.
Depth: 38.4 cm
Width of chimney: 29.8 cm
Depth of chimney: 20.0 cm
Weight: 15.50 kg
Cord length: 100.0 cm
Max. height extraction: 105.7 cm
Min. height extraction: 78.2 cm
Max. height recirculation: 115.7 cm
Min. height recirculation: 90.7 cm
Motor power: 270 W
Length : 79 cm
Width : 60 cm
Height : 51 cm
Diameter :
Gross Volume : 241.7 l
Never use corrosive or abrasive detergents, abrasive sponges, scourers or metallic scrapers.
Extraction rate in exhausting mode with booster function: 740 m³/h.
Extraction rate in exhausting mode: 400 m³/h.
Noise level at max. exhaust speed: 59 dB (A).
Extraction rate in re-circulation mode: 380 m³/h.
Noise level at max. re-circulation speed: 74 dB (A).
Voltage: 220-240V.
Additional information
Wall mounted extractor hood with 3 different speeds and booster function.
Additional information
This product bears the CE mark.
Assembly and installation
For installation to a valve: to be completed with NYTTIG tube 150 flexible pipe for extractor hood.
For recirculation installation: to be completed with NYTTIG tube 150 and charcoal filter NYTTIG FIL 500.
Sold separately
Flexible pipe for fan and charcoal filter sold separately.
Safety and compliance
This product bears the Serbian mark of conformity.
Can be installed in two ways: ducted to the outside or in recirculation mode fitted with charcoal filter.
3 speed settings allow you to increase or decrease the hood’s power at the push of a button, depending on your cooking needs.
Dimmable LED strip included; effectively illuminates the cooking surface and provides energy saving.
The vertical angle of the fan allows you to easily see and reach saucepans and frying pans on the hob.
The tempered glass surface is easy to clean.
Touch-control panel is easy to access and use, since it is placed in the front.
Easy to open. Just pull the glass part towards you to be able to clean or replace the filter.
Function/solution
Sound levels
Sound levels for appliances are measured in decibels (dBs). Our extractor hoods have been tested in speed 3 to determine the dB level. The sound level of your extractor hood is affected by: • Type of installation. Exhaust-mode or recirculation-mode. • Length and diameter of the exhaust pipe between extractor and exhaust vent. The longer it is and the smaller the diameter, the louder it gets. • 90° bends. The more bends you have in the exhaust pipe, the greater the sound.
Quality/durability
Sensitive to noise or have an open-plan home?
For extractor hoods, a noise level below 60 dB is considered low – roughly equivalent to a normal conversation between two people. We measure the noise level of our hoods at max speed, making it easier to compare different models. Note that sound levels decrease at lower speeds, and recirculating hoods are typically louder than those vented outdoors. Noise may also increase if the ducting is long or has several bends, as the air has to work harder to pass through the system.
