ENEBY support

How to set up ENEBY 30 Bluetooth speaker*

  • Connect the power cord to ENEBY speaker and to the main wall outlet.
  • To turn on or off, press the knob on the front of the speaker.
  • On your mobile device, go to the Bluetooth menu and look for ENEBY 30.
  • You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
  • Turn the knob to adjust volume.

* Applies to: 103.573.96; 804.014.66

How to change sound settings on ENEBY 30 Bluetooth speaker*

  • Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.
  • Press once more to change the treble. Press again to confirm your settings.
  • To reset the speaker settings and forget all connected devices, press and hold the knob for 10 seconds.

* Applies to: 103.573.96; 804.014.66

A quick look at how to adjust the bass and treble settings on your ENEBY 30 Bluetooth speaker.

.

How to set up ENEBY 20 Bluetooth speaker*

  • Connect the power cord to ENEBY and to the main wall outlet.
  • To turn on or off, press the knob on the front of the speaker.
  • On your mobile device, go to the Bluetooth menu and look for ENEBY 20.
  • Through Bluetooth, you can connect up to eight devices to ENEBY speaker.
  • You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.
  • Turn the knob to adjust volume.
  • To make your speaker portable, attach the handle and use the ENEBY battery pack (sold separately).

* Applies to: 503.576.29; 804.013.86

A quick guide to get up and running with your ENEBY 20 Bluetooth speaker.

.

How to change sound settings on ENEBY 20 Bluetooth speaker*

  • Turn on the speaker, then press and hold the knob for 3 seconds. Now you can adjust the bass setting.
  • Press once more to change the treble. Press again to confirm your settings.
  • To reset speaker settings and forget all connected devices, press and hold the knob for 10 seconds.

* Applies to: 503.576.29; 804.013.86

How to set up ENEBY portable Bluetooth speaker*

  • Insert three, rechargeable LADDA 900 AAA batteries. You can open and close the battery lid with a coin or similar.
  • Press the on/off button for two seconds to turn on the speaker and enter the Bluetooth mode. On your mobile device, go to the Bluetooth menu and look for ENEBY Portable.
  • You can also connect your device directly to ENEBY with the AUX-in and a 3.5mm audio jack.
  • To charge the LADDA 900 AAA batteries inside the speaker, use the included USB cable.

* Applies to: 503.576.29; 804.013.86; 103.573.96; 804.014.66

How to set up ENEBY built-in Bluetooth speaker*

  • Insert three, rechargeable LADDA 900 AAA batteries. You can use a screwdriver to open and close the battery lid on the bottom. Use the included USB cable to charge the LADDA 900 AAA batteries inside the speaker.
  • You’ll need a FIXA hole saw if you want the speaker built-in to a piece of furniture.
  • To turn on the speaker and enter the Bluetooth mode, press the on/off button for two seconds. On your mobile device go to your Bluetooth menu and search for ENEBY Built-in.
  • You can also connect your device directly to ENEBY with the AUX-in using a 3.5mm audio jack.

* Applies to: 503.576.29; 804.013.86; 103.573.96; 804.014.66

This quick guide shows you how to set up, install and start enjoying your ENEBY built-in Bluetooth speaker.

.

How to install ENEBY stand*

You can easily mount ENEBY 20 speaker and ENEBY 30 speaker on the ENEBY stand, with the two included bolts.

* Applies to: 503.576.29; 804.013.86; 103.573.96; 804.014.66

This short video shows you how easily you can start to use the ENEBY stand with your ENEBY Bluetooth speaker.

How to install ENEBY wall mount*

You can attach ENEBY 20 speaker and ENEBY 30 speaker to a wall with the ENEBY wall mount. Always use screws and plugs that are suitable for the material in your wall.

* Applies to: 503.576.29; 804.013.86; 103.573.96; 804.014.66

A quick look at how to use the ENEBY wall mount to fix your IKEA ENEBY speaker to a vertical surface.

How to adjust bass and treble*

  • Start playing a song
  • Then press and hold the knob
  • Hold the knob until the third red signal
  • Adjust the bass
  • Press once and adjust the treble
  • Then press once to confirm the chosen settings

* Applies to: 404.574.98; 90457556; 60457567; 50457577

How to disable auto-off function*

  • Press and hold the knob
  • Hold it until the fourth red signal appears

* Applies to: 404.574.98; 90457556; 60457567; 50457577

How to stereo pair two speakers*

  • Turn both speakers on
  • Then press and hold the knobs at the same time
  • Release when the LED light turns red the second time
  • Then press the knob once on the left speaker

* Applies to: 404.574.98; 90457556; 60457567; 50457577